AFC-100X-XX-XX


Description: Conveyor Kit - 9.0" conveyor kit shown. Fits most 1.5" and 3.0" aluminum extrusion. Part number based on features. example AFC-1002-90-XX is a conveyor kit with 2 legs stands (AFC-1002), 9.0" wide (AFC-1002-90), and the last 2 letters stand for the drive kit needed (AFC-1002-90-BP, AFC-1002-90, BI, or AFC-1002-90-OR). Kits do not include aluminum extrusion, motors, or V-belts. Metric kits will be available soon.
More Information




AFC-1


Description: Conveyor Bearing Block attaches to the extrusion body and holds the bearing used for the rollers on the conveyor. Block includes the bearing, T nut, and fasteners. The bearing fits the ½” diameter shaft of the rollers. Designed for easy bearing replacement when needed. The block has a boss to position and guide the block onto the extrusion fastener slot.
More Information




AFC-6


Description: Stand Guide attaches to the bottom of the 1.5" square extrusion used in making a stand. This block provides additional lateral support when the extrusion is inside 3.0" stand base extrusion. Mounting bolt is included.
More Information




AFC-7


Description: Stand Lock Plate attaches to the end of the 3.0" square stand base extrusion end tapped holes. The 1.5" square adjustable stand extrusion orients at a 45 degree angle to fit inside the 3.0" square extrusion. Included with this plate is the handle kit to lock the adjusting extrusion and easily set the height, as well as the mounting hardware to the tapped holes in the 3.0" square extrusion.
More Information




AFC-10


Description: Tension Block - Use this block at the idle end to give precise belt tension adjustment. Use this in conjunction with the AFC-1 bearing blocks. This block attaches into the extrusion T-slot with included fasteners. The included tension adjustment screw can be turned with a standard open end wrench.
More Information




AFC-14V-15


Description: Conveyor rollers are 1,5" wide and can be stacked to make conveyor widths of 1.5", 3.0", 4.5", 6.0", 7.5", and 9" wide conveyors. Rollers can be used for drive and idle ends. Rollers feature a 6MM centered V belt driver for both drive and belt tracking. This V belt aligns with the T-slot in the extrusion so that the belting material is guided th entire length of the conveyor, Setscrews are included to secure to the axles. Drive and idle axles are not included and must be ordered separately.
More Information




AFC-17


Description: Bridge Plate is used on conveyors 6.0", 7.5", or 9.0" wide to secure the extrusions together behind the drive and idle rollers and keep them aligned with one another. Includes mounting hardware.
More Information




AFC-20DK-BI


Description: Drive kit assembly for Baldor 90 Degree Gearmotor includes all the parts needed to build the conveyor drive except the motor and roller axles. Includes AFC-20 motor mounting plate, AFC-21 motor mounting cover, AFC-18 conveyor roller pulley, AFC-18 motor pulley, AFC-23 timing belt. and all hardware. Motor not included.
More Information




AFC-20DK-BP


Description: Drive Kit for Baldor/McMaster Carr Parallel Gearmotors includes all the parts needed to build the conveyor drive except the motor and roller axles. Includes AFC-20 motor mounting plate, AFC-21 motor mounting cover, AFC-18 conveyor roller pulley, AFC-19 motor pulley, AFC-22 timing belt. and all hardware. Motor not included.
More Information




AFC-20DK-OR


Description: Drive Kit for Oriental Parallel Gearmotors includes all the parts needed to build the conveyor drive except the motor and roller axles. Includes AFC-20 motor mounting plate, AFC-21 motor mounting cover, AFC-18 conveyor roller pulley, AFC-19 motor pulley, AFC-23 timing belt. and all hardware. Also include the AFC-24 Oriental motor control mounting plate and hardware. Motor not included.
More Information




AFC-25


Description: Stand Foot Plate attaches to the 3.0" extrusion used on a stand base. Bolt pattern for the extrusion orients at the 45 degree angle needed. Plate makes a stable base that has provisions for both leveling screws and floor anchor points. Hardware included for mounting to aluminum extrusion. Levelling screws and anchor bolts not included.
More Information




Example Application Conveyor Assembly


Description: AFC-1002-45 Conveyor shown. Please contact your Authorized Swivellink Distributor for more information. Available in stock widths of 1.5", 3.0", 4.5", 6.0", 7.5", and 9.0" - conveyor kits do not include motor, V-belts, or aluminum extrusion. Metric kits will be available soon.
More Information