Standard Ball Base (AFSB-1 or SLM-1)


Description: The imperial (AFSB-1) ball base has a hole pattern to fit most standard T-slot aluminum extrusions and the metric (SLM-1) ball base has a hole pattern to fit most metric T-slot aluminum extrusions. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires.
More Information




Small Ball Base (AFSB-1XS or SLM-1XS)


Description: The XS (extra small) ball base has 2 holes for ease of mounting. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove on the side of the base for cables, hose, and wires. The Imperial (AFSB-1XS) ball base mounts to imperial plates with XS in the part number and to the imperial XS knuckles (AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS coupler). The metric (SLM-1XS) ball base mounts to Metric plates with XS in the part number and to the Metric XS knuckles (SLM-2XS, SLM-2XS90, and SLM-2-2XS coupler).
More Information




Standard Knuckle (AFSB-2 or SLM-2)


Description: The knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability.
More Information




Small Knuckle (AFSB-2XS or SLM-2XS)


Description: The small knuckle uses a double socket configuration to clamp to the ball on a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability.
More Information




Small Tee Knuckle (AFSB-2XS90 or SLM-2XS90)


Description: The Small Tee Knuckle was designed to work with a Small Tee Link to create two branches from one base. These small tee knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.
More Information




Heavy Duty Knuckle (AFSB-2HD)


Description: The heavy duty knuckle uses a double socket configuration to clamp onto the heavy duty ball base or heavy duty link. The design allows for a large range of motion while maintaining the internal hose and cable routing capabilities. The heavy duty knuckle is shipped with (4) socket head cap screws. The clamp handle is sold separately.
More Information




Ball Adaptor (AFSB-3 or SLM-3)


Description: This product is a ball only that can be used with a 1/2” NPT threaded pipe to acquire any length necessary. The imperial ball size fits our standard series AFSB-2, AFSB-290, and AFSB-2-2XS. The metric ball fits our standard series SLM-2, SLM-290, and SLM-2-2XS.
More Information




Standard Links (AFSB-3-2,4,6,8,12 or SLM-3-50,100,150,200,300)


Description: Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. Links are hollow to continue the cable routing ability. Example: AFSB-3-6 would be a 6” link (imperial) and the SLM-3-150 would be a 150MM link (metric).
More Information




Small Links (AFSB-3-2XS, AFSB-3-4XS, SLM-3-50XS, or SLM-3-100XS)


Description: Small Links are used with Small Knuckles to extend reach and increase flexibility. The imperial link AFSB-3-2XS is a 2" small link and the AFSB-3-4XS is a 4" small link. The metric link SLM-50XS is a 50MM small link and the SLM-3-100XS is a 100MM small link. Links are hollow to continue the cable routing ability.
More Information




Heavy Duty Link (AFSB-3-6HD)


Description: The heavy duty link is used with the heavy duty knuckle to extend the reach and increase the flexibility. The heavy duty link has a knurled area around the both ball ends to increase the grip and stability of the assembled parts.
More Information




Start Button Base (AFSB-4 or SLM-4)


Description: When ergonomics are important there is no better way to put a cycle start button on a machine. With threaded M30 x 1.5 and room for the cable connection inside, these are designed to protect the button from damage. Use them once and you will never go back to a square bracket. The imperial start button base mounts to AFSB-2 and AFSB-290. The metric start button base mounts to the SLM-2 and SLM-290..
More Information




AFSB-5 / SLM-5


Description: Our most versatile in the vision series. Fits: BANNER 70mm area light, Presence plus camera mounts: COGNEX Checker 100, Dataman 100/200, Insight 5000 (5100, 5100C, 5400, 5400C, 5403, 5604, 5605, 5705), DVT Legend 500, DALSA, BOA, KEYENCE IV- 500/150/2000 Vision sensors. The imperial plate mounts to AFSB-1 and AFSB-1XS ball bases. The metric plate mounts to the SLM-1 and SLM-1XS ball bases.
More Information




Small Camera Stem (AFSB-5XS/SLM-5XS)


Description: If your camera has a 1/4-20 tripod mount, you can simply thread on the XS series stem and mount your camera. The imperial AFSB-5XS mounts to AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS. The metric SLM-5XS mounts to the SLM-2XS, SLM-2XS90, and SLM-2-2XS.
More Information




Standard Sensor Mount 30MM (AFSB-7/SLM-7)


Description: Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, and Turck 30MM threaded barrel- type sensors. Sight holes allow the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The imperial sensor mount AFSB-7 mounts to AFSB-2, AFSB-290, and AFSB-2-2XS. The metric sensor mount SLM-7 mounts to SLM-2, SLM-290, and SLM-2-2XS.
More Information




Small Sensor Mount 12MM (AFSB-7XS/SLM-7XS)


Description: Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Sensopart, and Turck 12MM threaded barrel- type sensors. Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The small imperial sensor mount AFSB-7XS mounts to AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS. The small metric sensor mount SLM-7XS mounts to SLM-2XS, SLM-2XS90, and SLM-2-2XS
More Information




Standard Sensor Mount 18MM (AFSB-8/SLM-8)


Description: Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, Sick, Tri-Tronics, and Turck 18MM threaded barrel- type sensors. Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The imperial sensor mount AFSB-8 mounts to AFSB-2, AFSB-290, and AFSB-2-2XS. The metric sensor mount SLM-8 mounts to SLM-2, SLM-290, and SLM-2-2XS
More Information




Small Sensor Mount 8MM (AFSB-8XS/SLM-8XS)


Description: Fits: Allen Bradley, Balluff, Banner, Baumer, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, and Turck 8MM threaded barrel- type sensors. Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The imperial sensor mount AFSB-8XS mounts to AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS. The metric sensor mount SLM-8XS mounts to the SLM-2XS, SLM-2XS90, and SLM-2-2XS.
More Information




AFSB-100-EOAT


Description: This adaptor plate mounts to the robot and to aluminum 1.5" and 1.0" series extrusions either vertically or horizontally. This plate can also mount (2) or (4) AFSB-1000-10-V vacuum arms directly onto the plate instead of using the aluminum extrusion.
More Information




AFSB-101-M6X4-50


Description: This adaptor plate mounts to the UR3, UR5, and UR10 universal robot. This plate can also mount (4) AFSB-1000-10-V vacuum arms directly onto the plate.
More Information




AFSB-12-28.5MM-BALL SLEEVE ADAPTOR


Description: This ball sleeve adaptor allows the 28.5MM ball to fit into the standard AFSB-2 knuckle or AFSB-290 tee knuckle and allow for a large range of motion. The ball sleeve adaptor consists of 2 halves that clamp over the 28.5MM ball to seat securely into the standard knuckle.
More Information




AFSB-500XS-D-GB/SLM-500XS-D-GB


Description: Fits: Dalsa Genie M1600, BOA BVS-0640 and Sony XC-ST50. The imperial AFSB-500XS-D-GB mounts to AFSB-1XS small ball base. The metric SLM-500XS-D-GB mounts to the SLM-1XS small ball base.
More Information




AFSB-516-S-INSPECTOR


Description: Fits Sick Inspector I series, IVC 2D, LUT3, LUT9, CLV-61X, LMS 100-1000, TIM310, Lector 63X series and Keyence IL-2000 w/ bracket. Mounts to AFSB-1 or AFSB-1XS ball bases.
More Information




AFSB-520XS-C-DMIC / SLM-520XS-C-DMIC


Description: Fits: Cognex Dataman 100/150/200/260/500, Insight Micro, Insight 1100, 4GX, and Checker 200. Also Keyence CA-HX048-C, CA-HX048-M, and SVS-Vistek EVO series cameras. The imperial plate mounts to AFSB-1XS small ball base. The metric plate mounts to the SLM-1XS small ball base.
More Information




AFSB-521-C-DI / SLM-521-C-DI


Description: Fits: Cognex Dataman 300, Insight 7000, and Insight 7800. Also fits Banner Luminescence Q26PLUMQ5. The imperial plate mounts to AFSB-1 and AFSB-1XS ball bases. The metric plate mounts to the SLM-1 and SLM-1XS ball bases.
More Information




AFSB-523-C-I2000/SLM-523-C-I2000


Description: Fits: Cognex Insight 2000, Insight 8000, and Dataman 260 Series. The imperial AFSB-523-C-I2000 mounts to AFSB-1 and AFSB-1XS ball bases. The metric SLM-523-C-I2000 mounts to the SLM-1 and SLM-1XS ball bases.
More Information




AFSB-530-B-P4


Description: Fits: Banner P4 Vision Sensors, P4ORS-P-BCOC, P4ORS-G-BCBD,VE series, and Keyence IL2000 w/ bracket. Mounts to AFSB-1 or AFSB-1XS.
More Information




AFSB-535XS-B-ACA2500


Description: Fits: Basler 2CL, 2CL C, 2CL CS, GIGE C, GIGE CS, USB3 C, and USB3 CS. Also fits Fanuc R-30iB Plus, Banner Luminescence Q26PLUMQ5 and Cognex GigE CIC-300, CIC-1300, CIC-2000-60, CIC-4000, CIC-5MR/5000, and CIC-10MR cameras. Mounts to AFSB-1XS.
More Information




AFSB-540-IFM


Description: Fits: IFM O2V100 series, O2D220 Series, O3D200/201, and O1D100 series. Mounts to AFSB-1 and AFSB-1XS.
More Information




AFSB-550-K-CVIV / SLM-550-K-CVIV


Description: Fits: Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, CV-H500C, CV-500M, IV150, IV500, IV2000, IVH2000MA, and Mounting Wall Adaptor. Also fits Keyence CA-HX200M, CA-HX500M, XG-035C, XG-035M, XG-200C, XG-200M, XG-H200M, and SR-D100. The imperial plate mounts to AFSB-1 and AFSB-1XS ball bases. The metric plate mounts to the SLM-1 and SLM-1XS ball bases.
More Information




AFSB-551XS-K-SR650-750/SLM-551XS-K-SR650-750


Description: Fits Keyence code readers SR650, SR650HA, SR651, SR750, SR750HA, SR751, SR752, and SR1000. The imperial AFSB-551XS-K-SR650-750 mounts to AFSB-1XS small ball base. The metric SLM-551XS-K-SR650-750 mounts to the SLM-1XS small ball base.
More Information




AFSB-560-D-AMT


Description: Fits: Datalogic A20, M1XX without bracket, M1/M2/M3XXT series brackets with metric and standard holes, M2XX/M3XX/T series without bracket and MX-E series. Also fits Banner Luminescence Q26PLUMQ5 and Cognex CIC-5000 GigE cameras. Mounts to AFSB-1 and AFSB-1XS.
More Information




AFSB-580-B-VS


Description: Fits: Baumer Vision Sensors CS100, ID100, ID110, XC100, XC200, XF100, and XF200. Also fits Dalsa BOA Spot cameras and Datalogic DS2100N cameras. Mounts to AFSB-1 or 1XS.
More Information




AFSB-620-S75/SLM-620-S75


Description: Fits: Smart Vision brick light S75, SC75, ODS75, SW75, and ODSW75. The imperial plate mounts to AFSB-1 and AFSB-1XS ball bases. The metric plate mounts to the SLM-1 and SLM-1XS ball bases.
More Information




AFSB-621-L300/SLM-621-L300


Description: Fits: Smart Vision L300 and Allen Bradley 440L bar lights . The imperial AFSB-621-L300 mounts to AFSB-1 and AFSB-1XS ball bases. The metric SLM-621-L300 mounts to the SLM-1 and SLM-1XS ball bases.
More Information




AFSB-623-HPIA


Description: Fits Smart Vision HPIA lights for Cognex Camera ODDM-302 Series, ODDM-503 Series, ODDM-R3VI, Cognex DM302-HPIA and DM503-HPIA. Mounts to AFSB-1 or AFSB-1XS
More Information




AFSB-631-LEDRA70/SLM-631-LEDRA70


Description: Fits: Banner LEDRA70 and LEDRA70XD5 area light. The imperial AFSB-631-LEDRA70 mounts to AFSB-1 and AFSB-1XS ball bases. The metric SLM-631-LEDRA70 mounts to SLM-1 and SLM-1XS ball bases.
More Information




AFSB-632-WLS28-285X/SLM-632-WLS28-285X


Description: Fits: Banner WLS28 strip light non-switch 145mm long, non-switch 285mm long, and with ON/OFF switch 145mm long. The imperial AFSB-632-WLS28-285X mounts to AFSB-1 and AFSB-1XS ball bases. The metric SLM-632-WLS28-285X mounts to SLM-1 and SLM-1XS ball bases.
More Information




AFSB-643-M-DL


Description: Fits: Metaphase Diffused Dome Lights MB-DL101, MB-DL206, MB-DL306, MB-DL406, MB-DL606, MB-DL706, and MB-DL906. Mounts to AFSB-1 or AFSB-1XS.
More Information




AFSB-650-HPD100-150/SLM-650-HDP100-150


Description: Fits: CCS Dome Light HPD-100 and HPD-150. Also fits CCS Ring Lights HPR-100, HPR-150, HPR-200, and HPR2-100 and Keyence Ring Light CA-DRW10X This part number comes with one yoke and 2 tabs. The tabs will be used for the 100 series. If using the yoke for the 150 series, the tabs are not needed but they are provided. The Imperial plate (AFSB) mounts to the AFSB-1 ball base and the metric plate (SLM) mounts to the metric SLM-1 ball base.
More Information




AFSB-660-AI


Description: Fits: Advanced Illumination AL116, AL126, AL143, AL150, AL179, AL295, AL4424, AL4554, AL46120, DL085, DL110, DL37100, DL38144, LL174, LL5806, LL6324, and Baumer Poscon OXE7.E25T. Mounts to AFSB-1 and AFSB-1XS.
More Information




AFSB-661-AI-RL


Description: Fits: Advanced Illumination RL113, RL127, RL169, RL1424, RL1660, RL2316, RL3536, RL3940, RL5064, and RL36120. Also mounts the Keyence CA-DRW5X ring light. Mounts to AFSB-1 and AFSB-1XS.
More Information




AFSB-663XS-AI


Description: Fits: Advanced Illumination AL116, AL126, AL143, AL295, DL072, DL104, DL2449, and DL3316. Mounts to AFSB-1XS.
More Information